The Solar Collector |
NOBO solar thermal collectors can be installed in almost any orientation and location allowing maximum freedom when integrating the solar system into the building structure. The mounting kits allow the solar collectors to be fitted to pitched tile roofs, pitched slate roofs, flat roofs and mounted flush with the roof using the integrated roof kit. |
|
FEATURES:
- 3.2mm collector glass ensures high solar transmission rates
- Laser welded absorber retains absorber coating, with no visible seams
- Anthracite aluminium collector frame provides lightweight protection for the absorber that blends with the roof
- High levels of insulation on back and sides ensure maximum captured heat is transferred to the heating system
- 4 plumbing connections allows flexible collector configuration
|
|
 |
Heat Transfer System |
The heat transfer
system consists of a control unit, pump unit, heat transfer medium and an expansion vessel.
All of these components, as with the whole solar kit are of the highest quality and chosen for their reliability and suitability for the UK climate. |
|
FEATURES:
- Variable pump speed control for maximum solar energy gain
- LCD controller with 3 temperature probes for accurate temperature measurement
and system operation
- Pump station incorporating pressure relief valve, two non-return valves, flow meter and two flush and fill connections for quick and easy install
- Optional 15m flexible insulated hose for fast and reliable installation
|
|
 |
Solar Hot Water
Storage Cylinder |
To ensure that there is enough hot water for any size of property, the NOBO range of duplex stainless steel solar cylinders are available in 4 capacities,
and in both direct electric or indirect models. Direct electric cylinders come with two immersion heaters and a single solar coil, while indirect versions have
twin coils allowing an electric, gas or oil boiler to be connected. |
|
FEATURES:
- Choice of cylinders from 175-305 litre capacity available in direct (single coil)
or indirect (dual coil) options
- Duplex stainless steel construction with 60mm thick insulation for low heat loss
- High heat transfer via corrugated coil design maximises transfer of solar energy to the water
- High levels of insulation provides low energy losses
- Two sensor pockets allowing the monitoring of top and bottom cylinder temperatures
for improved solar system control
|
|
 |
